Product Description
A 604 - A604 - 40TE - 41TE - 41AE-AWD - 606 - A606 - 42LE - 42RLE TransGo SK604/42LE Shift Kit 1988 To 2006 Fits Non VLP Units Only.
Box May Differ From The Picture.
This Is A New TransGo SK604 Shift Kit For These Automatic Transmissions Non VLP Units 1988 Thru 2006:
Chrysler Dodge Plymouth Mitsubishi
- A604 - 604 - 40TE - 41TE - 41AE - 41AE-AWD 1988-on
- A606 - 606 - 42LE 1993-on
- 42RLE Non VLP Units ONLY
This Kit Has These Upgrades And Updates,
Corrects / Prevents / Reduces:
- Case, Valve Body And Accumulator Upgrade Parts.
- Heavy Duty And Normal Use Settings.
- Reduces Hot And Cold Limp Mode.
- Short Smooth Shifts.
- Prevents Common Limp Causes.
- Upgrades Early Designs To Later Specs.
- Special Ring / Seal Upgrades.
- Includes: Case, Accumulator And Valve Body Parts
This Kit Will Provide These Upgrades When Properly Installed:
- Crisper Shifts
- Greater Durability
- Special Instructions: Professional Installation Recommended. Does Not Require Transmission Removal For Kit Install But Some Steps Are Internal Only (Case Parts).
This Kit Can Be Installed With The Transmission In Or Out Of The Vehicle But Some Steps Will Be Skipped If Transmission Is Still In Vehicle Upon Install.
This Is A Must Do Upgrade For Every Rebuild Or To Prevent Problems In The Future For These Units.
This TransGo 604 SHIFT KIT® Valve Body Repair Kit fits 1989 and newer Chrysler, Plymouth, Dodge, Eagle, Ram, Jeep and Mitsubishi vehicles equipped with the A604/41TE, A606/42LE and 42RLE automatic transmission without variable line pressure solenoid and sensor. For models with VLP solenoid and sensor, you need # SK 42RLE-VLP Common complaints with this transmission are delayed forward or reverse, 4-3 coast downshift clunk as well as a 2-1 coast downshift clunk.
The 4-3 coast clunk is the result of a malfunctioning underdrive clutch inner piston seal. The TransGo SHIFT KIT® Valve Body Repair Kit provides a specially designed tuff seal and expander wire to address this complaint. The delayed engagement forward or reverse and the 2-1 coast downshift clunk is an age associated complaint that sets in when the low-reverse piston housing gasket shrinks and begins to leak. TransGo engineered a special gasket for this application made from a non-shrinking material.
Features and benefits:
The kit includes a low/reverse piston housing no-shrink gasket as well as TransGo engineered accumulator piston seals and expander wires for the models equipped with aluminum accumulator pistons. Also included is the special underdrive clutch piston Tuff™Seal that fits all models and a new pressure regulator spring that updates the earlier design valve bodies 1989-1991 to the match the revised pressure specifications from 1992 to 2006. The kit also includes accumulator spacers to make the releasing clutch exhaust faster resulting in shifts that are shorter and cleaner.
Corrects/Prevents/Reduces:
2-1 coast downshift clunk
Delayed or no forward or reverse
Accumulator leaks
4-3 coast downshift clunk
Provides cleaner and shorter shifts
Includes:
Non-Shrinking low/reverse piston housing gasket
(4) High temperature accumulator seals and expanders (for aluminum pistons only)
(3) Large accumulator spacers
Small accumulator spacer
Pressure regulator valve spring
Self-expanding Tuff™ underdrive seal and expander wire
Drill bit
Note:
High mileage vehicles sometimes come in with codes P0841, P0871, P0988, P1775 and P1776 due to wear at the solenoid switch valve bore in the valve body. If you need to address solenoid switch valve bore wear, then also check out TransGo solenoid switch valve kits.
It Just Ain't Fixed Without It!!!!!!