External Filter
Ford TorqShift
Deep Transmission Pan

Volume: 4.5 qts. over stock

Dimensions: Click here for dimensions.

PML designed this deep pan to help the TorqShift transmission better handle the high stresses of towing and hauling. It fits the 5R110 automatic transmission used in the F250, F350, F450, F550, E350, and E450 with these engines:

• 2003-2007, some 2008 and newer, with 6.0 Power Stroke diesel
• 2005-2007, some 2008 and newer, with 5.4 V8 and 6.8 V10

For 2008 and newer Ford Trucks: Ford added a new style of transmission pan and filter in 2008. The new style has a larger transmission pan and a filter that is internal, located inside the pan. 2008 and newer vehicles can have either the a "new style" transmission pan with an internal filter or the "old style" pan with an external filter. Please check which you have before ordering.

External Filter Style Pan
Pictured at left is the old style stock pan and external filter. If you have an external spin-on transmission oil filter near the bell housing (as shown), this pan, part number 36-5R1-840-DEEP (9973), is for you.

The Ford logo is on the side.

Internal Filter Style Pan
Pictured at left here is the new style stock pan. It is larger to accommodate an internal filter. If you have this larger pan with internal filter, you will need part number 36-5R1-840A-DEEP (11049), is for you.

The Ford logo is in the middle.

Excursion owners: some models of the Excursion have clearance issues and cannot accommodate a deeper pan. Please check your vehicle before ordering.

This transmission pan has two possible locations for a temperature sensor. There is a boss on the driver's side (visible on the right side of the as-cast image) and there is a boss on the passenger's side opposite the drain hole. These do not come machined.

The pan has cast-in filter supports. (Click on image at left to view larger picture in a separate window.)

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

Transmission Pan Features:

• Increased oil capacity for cooler temperatures
• Sand-cast aluminum with raised fins
• 3/16-inch thick wall construction to add strength to the transmission case
• 3/8-inch thick gasket flange will not bend when bolts are tightened
• Machined gasket surface for a secure seal
• Boss cast into pan can be machined for a temperature sensor
• Magnetic drain plug for easier, less messy maintenance
• Mounting hardware provided

Gasket and filter not included (use stock parts).

If you would like CT POWERTRAIN to machine your pan for a temperature sensor, there is an additional charge of $40. Please place your order and request the total if you would like machining