4R100-HD2 TransGo Reprogramming Kit For E4OD And 4R100 "Tugger" 1989-On
Box May Differ From Photo
This Is A TransGo Automatic Transmission Reprogramming Kit For:
- E4OD - E4 - E40D 1989-on
- 4R100 - 4R1 1998-On
- Does Not Fit 5R110 Or 5R110W
These Transmissions Can Be Found In Trucks, Vans, SUV's
This Kit Will Work In Gas Or Diesel Vehicles.
This Kit Offers,
- For Working Trucks;
- Doubles Low Clutch Holding Pressure In “1” For Downhill Use,High Speed Pull-into “1”.
- Handles Exhaust Brake.
- Adjusts Shift Firmness,
- More Cooling/lubrication,
- Better Converter Feed & Capacity.
- Special Instructions: Requires Professional Installation And Transmission Removal For Proper Installation.
- Notice: This Kit Requires Removal Of The Transmission For Installation Of The Internal Parts.
Some Gaskets That Are Required For Proper Installation May Need To Be Purchased Separately.
The ultimate hauling solution for Ford trucks and vans featuring high-load calibration parts for both the E4OD and 4R100 automatic transmissions.
- Doubles low clutch holding pressure in manual first gear for downhill compression braking
- Handles exhaust brake
- Adjust shift firmness
- Better cooling/lubrication and converter feed/capacity using included optional internal upgrades
- Prevents downhill clutch burnup
- Codes 628, P1740, P1744
- Soft shifts
- 2nd and 3rd burn-up
- Converter burn-up
- Reverse delay
- No reverse hot
- Converter slide/shudder
- Pump buzz
- Pressure regulator boost valve
- 1-2 shift valve spring
- Line regulator valve
- Innovative line-to-lube components
- High temp direct clutch seal
- Coast clutch HD snap ring
- OD housing spiral lock snap ring
- Updated direct clutch outer seal
- Calibration plate for firmness adjustments
- Quick-fill valve
- L/R mod boost valve
It Just Ain't Fixed Without It