Deep Transmission Pan for Dodge 727 (36RH, 37RH), 518 (46RH, 46RE), 618 (47RH, 47RE), 48RE Transmissions.
Volume: 2 qts. over stock
Dimensions: Click here for dimensions.
Number of Bolts: 14
Fits: This transmission pan fits all 1989-2007 Dodge Ram 1500, 2500, and 3500 trucks with 5.9 Cummins diesel or V10 engines. It also fits some Dodge trucks with V8 gas engines from the late 1960’s until 2001, two wheel drive Durango with 5.9 V8, two wheel drive Dakota with 5.9 V8, some V8 powered Ram vans.
Four wheel drive Durango & Dakota will likely have exhaust and frame clearance problems with a deeper pan.
This transmission pan works with these Dodge transmissions:
- 518, A518 (46RH, 46RE)
- 618, A618 (47RH, 47RE)
- 727, A727 (36RH, 37RH)
This pan is one inch deeper than stock. PML designed this pan to work with the stock filter. A filter extension is not needed with a PML pan. There is plenty of mixing of fluid due to vehicle movement as well as the fluid being sucked into the filter and returned from the oil cooler to prevent a stagnant layer at the bottom. The filter and oil level are at the same location with the PML pan and the stock pan.
Transmission Pan Features
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to the transmission case
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal
- Boss cast into pan can be machined for a temperature sensor
- Magnetic drain plug for easier, less messy maintenance
- Mounting hardware provided
Gasket and filter not included (use stock parts) SEE BELOW.
We do sell the service kit and can add to the order at additional cost.
PRO-GRADE PAN GASKET $5.00 USD IF ADDED TO PAN PURCHASE
PRO-GRADE EARLY CLOTH FILTER $10.00 USD IF ADDED TO PAN PURCHASE
PRO-GRADE LATE CLOTH FILTER $5.00 USD IF ADDED TO PAN PURCHASE
PRO-GRADE LATE PLASTIC/METAL A518/618 FILTER $12.00 USD IF ADDED TO PAN PURCHASE
DUE TO THE HIGH DEMAND OF THESE PANS THERE MAY BE A ONE TO THREE WEEK BACK ORDER, SO PLEASE CALL OR EMAIL PRIOR TO YOUR PURCHASE TO CHECK STOCK. THANK YOU!!!
100% MADE IN THE USA
PLEASE MAKE SURE OF YOUR TRANSMISSION PRIOR TO
ORDERING YOUR ITEM.
CT POWERTRAIN PRODUCTS PART NUMBER: 22-727-840-DEEP