Toggle menu
1-888-828-7697
  • 56-4LD-840-DEEP
  • 56-4LD-840-DEEP Inside
  • 56-4LD-840-DEEP Specs

    • Transmission Deep Oil Pan Ford A4LD 4R44E 4R55E 5R44E 5R55E New As-Cast Aluminum

    PML Inc.

    $305.00
    (No reviews yet) Write a Review
    SKU:
    56-4LD-840A-DEEP
    Weight:
    13.00 LBS
    Width:
    12.00 (in)
    Height:
    5.00 (in)
    Depth:
    17.00 (in)
    Gift wrapping:
    Options available
    Shipping:
    Calculated at Checkout

    Product Description

    4R44E, 4R55E, 5R44E, 5R55E, A4LD, A4LD-E New As-Cast Aluminum Deep Transmission Pan.

    Ford Lincoln Mercury Merkur Mazda

    THIS PAN WILL NOT FIT 5R55W, 5R55S or 5R55N!!!!!!!!!

     

     

     

    Volume: 3 qts. over stock

    Dimensions:Click here for dimensions.

    Number of Bolts: 18

    This heavy duty, extra capacity Ranger and Explorer Ford transmission pan fits 2WD and 4WD vehicles with the 4R55E, 5R55E, 4R44E, and A4LD transmissions. These 4 and 5 speed transmissions are found in primarily in 1985 to 2001 Ford Rangers and Explorers but can also be in several models and years:

    • Ford Aerostar, 1986-1997 with 2.8, 3.0, and 4.0 engines (the 1986 model was introduced in 1985)
    • Ford Bronco II, 1985-1990 with 2.8 and 2.9 engines usually have front cross member interference
    • Ford Explorer, 1991-1994 with 4.0 engine
    • Ford Explorer 1995 - 2004 usually have exhaust interference with a larger transmission pan or have a 5R55W pan which requires a fill/level check on the pan)
    • 1990-1993 Ford Mustang with 2.3 engine (may have AOD transmission and clearance issues)
    • Ford Mountaineer, 1998-2001 with 4.0 engine
    • Ford Ranger, 1989 - 1997 with 2.3 (4 cylinder), 2.5 (4 cylinder), 2.9, 3.0, and 4.0 engines
    • Ford Ranger, 1998 and newer with 2.3 (4 cylinder) and 2.5 (4 cylinder) — 4.0 and 3.0 engines usually have exhaust interference with a larger transmission pan
    • Ford Thunderbird, 1987-1988, with 2.3 engine
    • Mazda Navajo 1991-1994
    • Mazda Pick-Up 1994-1998

    Some vehicles with a 4R55E, 5R55E, 4R44E, or A4LD transmission may have interference in the way of a deeper pan. Interference can be from many things, such as a cross member or the exhaust system. Please check your vehicle for clearance before ordering.

    Please check your vehicle to be sure there is enough room to allow our pan to clear your exhaust system. Some customers with the 4.0 V6 have had contact with the catalytic converters or resonators that are located along side or in front of the transmission pan.

    Filter Info

    PML's Ford transmission pan is designed to work with the stock 4WD filter.

    On a 2WD vehicle, you must use the 4WD filter because of the pick up tube. These images show from left to right: the 2wd filter, the 4wd filter, both filters, side view of both filters. Click on images to view larger ones in a separate tab or window.

    Ford tranny with 2wd filter Ford tranny with 4wd filter Ford transmission with filters Ford transmission with filters side view

    Baffles

    PML's Ford transmission pan features internal baffles to reduce sloshing and provide additional surface area to remove heat from the transmission fluid.

    This shows the cast-in baffles and the pan interior. Click on image to view larger picture in a another window.

    		 Inside of PML Ford tranny pan

    PML Pan Compared to Stock

    Click for a picture comparing a 4WD stock pan with our pan.

    Installed on a Ford Ranger

    Customer installed this PML pan on his 1997 Ford Ranger. They included a temperature sensor.

    Ford Ranger with PML transmission pan   Temperature sensor on PML Ford transmission pan   PML Ford transmission pan, installed

    (Black Powder Coated Pan shown, this listing is for a As-Cast pan Add $65.00 for Powder coating Service).

    Transmission Pan Features

    • Increased oil capacity for cooler temperatures
    • Sand-cast aluminum with raised fins
    • 3/16-inch thick wall construction to add strength to the transmission case
    • 3/8-inch thick gasket flange will not bend when bolts are tightened
    • Machined gasket surface for a secure seal
    • Boss cast into pan can be machined for a temperature sensor
    • Magnetic drain plug for easier, less messy maintenance
    • Mounting hardware provided

     

    PLEASE SEE OUR LISTING FOR THE SERVICE KITS AND WE CAN

    COMBINE SHIPPING.





    Gasket and filter not included (use stock parts).

    We do sell the service kit and can add to the order at additional cost.





    DUE TO THE HIGH DEMAND OF THESE PANS THERE MAY BE A ONE TO THREE WEEK BACK ORDER, SO PLEASE CALL OR EMAIL PRIOR TO YOUR PURCHASE TO CHECK STOCK. THANK YOU!!! 

    USA Flag
    100% MADE     IN THE USA

    PLEASE MAKE SURE OF YOUR TRANSMISSION PRIOR TO

     

    ORDERING YOUR ITEM.

     

    CT POWERTRAIN PRODUCTS PART NUMBER: 56-4LD-840A-DEEP

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    You May Also Like...