Toggle menu
1-888-828-7697
  • 37-1000-840-DEEP
  • 37-1000-840-DEEP Inside View
  • 37-1000-840-DEEP Drain Plug View
  • 37-1000-840-DEEP Specs
  • 37-1000-840-DEEP Compared to Stock
  • 37-1000-840-DEEP Side By Side With Stock Pan
  • 37-1000-840-DEEP Filter Baffles

    • Transmission Deep Oil Pan GMC Chevy Allison 1000 AT1000 As Cast Aluminum New HD

    PML Inc.

    $325.00
    (No reviews yet) Write a Review
    SKU:
    37-1000-840-DEEP
    Condition:
    New
    Weight:
    15.00 LBS
    Width:
    17.00 (in)
    Height:
    6.00 (in)
    Depth:
    20.00 (in)
    Shipping:
    Calculated at Checkout

    Product Description

    GM Allison 1000 NEW As-Cast Aluminum Deep Transmission Pan.

     

    Volume: 3.25 qts. over stock

    Dimensions: Click here for dimensions.

    Number of Bolts: 12

    This PML pan fits 2001 to present Chevrolet & GMC full size trucks with the Allison 1000 5 & 6 speed automatic transmission. This transmission is found in the Silverado & Sierra 2500HD & 3500 with the Duramax diesel and 8.1 liter gas engines.

    This pan may also fit 2006 and 2007 H1 Hummers. Please check carefully for fit and interference on this vehicle.

    The transmission pan features filter supports that are an integral part of the floor. The filter supports are designed to be easy to alter.
    PML Allison Tranny Pan, Inside View

    Out of the box the filter supports are set up to work with the shallow stock filter (CT Powertrain SKU # 37711). The supports can also be shortened to work with the deeper filter that Allison offers (CT Powertrain SKU # 37710) for this transmission. For the larger filter you'll need to cut the filter supports at the line designed into them for that purpose. See this image.

    After cutting the supports you'll have to make sure you use the deeper filter from then on as the stock filter would fall out of the valve body.

    Information about filters for reference only. Installer should verify transmission, filter, and fitment based on the individual vehicle.

    The pan has a boss that can be machined for a temperature sensor.

     

    Transmission Pan Features

    • Increased oil capacity for cooler temperatures
    • Sand-cast aluminum with raised fins
    • 3/16-inch thick wall construction to add strength to the transmission case
    • 3/8-inch thick gasket flange will not bend when bolts are tightened
    • Machined gasket surface for a secure seal
    • Boss cast into pan can be machined for a temperature sensor
    • Magnetic drain plug for easier, less messy maintenance
    • Mounting hardware provided

    Gasket and filter not included (use stock parts).  

    We do sell the service kit and can add at an extra cost.




    DUE TO THE HIGH DEMAND OF THESE PANS THERE MAY BE A ONE TO THREE WEEK BACK ORDER, SO PLEASE CALL OR EMAIL PRIOR TO YOUR PURCHASE TO CHECK STOCK. THANK YOU!!! 

     

     

     

    USA Flag
    100% MADE     IN THE USA

    THESE ARE THE PANS THE PROFESSIONALS USE.  DON'T SETTLE FOR LESS.

    After purchasing, pay instantly with your credit card through PayPal!
    Pay me securely with any major credit card through PayPal!
    VisaMasterCardDiscoverAmerican Express

    PLEASE NOTE: TRANSMISSION REMOVAL IS NOT REQUIRED TO COMPLETELY INSTALL THIS ITEM.

     

    PLEASE MAKE SURE OF YOUR TRANSMISSION PRIOR TO ORDERING YOUR ITEM.

     

     

     

    CT POWERTRAIN PRODUCTS PART NUMBER: K68908G

     

    Product Videos

    Custom Field

    Product Reviews

    Write a Review

    You May Also Like...